Home Decorators Collection 26655 Gebrauchs- und Pflegehandbuch PDF herunterladen (Seite 10)

Attaching the fan blades

□ Attach blade (G) to blade bracket (J) using the decorative

nuts (CC) and blade attachment screws (AA) provided. Insert

a blade attachment screw (AA) through a hole in the blade

(G) and blade bracket (J) into a decorative nut (CC). Repeat

for the two remaining holes in the blade (G).

□ Tighten each blade attachment screw (AA) securely.

□ Repeat these steps for the remaining blades.

Mounting the fan

□ Align the locking slots of the ceiling canopy (C) with the two

screws (SS) in the slide-on mounting bracket (A). Push up to

engage the slots, and turn clockwise to lock the canopy (C) in

place.

□ Firmly tighten the two mounting screws (SS).

□ Install the remaining two mounting screws (SS) into the holes

in the canopy (C) and tighten rmly.

□ Install the decorative canopy ring (L) by aligning the ring’s

slots with the screws in the canopy (C). Rotate the canopy

ring (L) counter-clockwise to lock it in place.

WARNING: When using the standard ball/downrod mounting, the

tab in the ring at the bottom of the mounting bracket must rest in

the groove of the hanger ball. Failure to properly seat the tab in

the groove could cause damage to the wiring.

Assembly - Hanging the Fan (continued)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 29 30

Keine Kommentare

Home Decorators Collection 26655 Gebrauchs- und Pflegehandbuch Seite 10